Technical Papers

To read and print the documents below, you will need Adobe Acrobat Reader. You can download the reader directly from Adobe.

AAPS - 2007

Clear Coated Tablets with High-Solids Aqueous Starch Coating and Minimal Tablet Weight Gain

(PDF, 457k)

Evaluation of a Process to Quickly and Efficiently Apply Dry Polymer to Acetaminophen Beads Using A Rotor Procossor

(PDF, 638k)

A Comparison of a Novel Rotor Processor with a Wurster Processor, Showing the Efficiency, Uniformity and Total Process Time to Apply a Sustained Release Polymer to Acetaminophen Beads

(PDF, 645k)

Controlled Release Society (CRS) - 2006

Rapid Polymetric Coating Technique Using Powder Layering in Rotor-Equipped Fluid Bed

(PDF, 2.0 Meg)

AAPS - 2006

Evaluation of a Novel Rotor Processor to Manufacture Spherical 100 - 300 micron Acetaminophen Beads, Using Two Methods; Spheronization and Powder Layering

(PDF, 679k)

A Comparison of a Novel Rotor Process with a Wurster Processor, Showing the Efficiency, Uniformity and Total Process Time to Manufacture Spherical Omeprazole Beads in the Range of 100-300 Microns

(PDF, 587k)

Particle Characterization Utilizing PAT (Process Analytical Technology) Tools

(PDF, 759k)

Evaluation of a Simple Fluid Bed Dryer Sampler Modification for On-Line Profiling and Endpoint Using Effusivity

(PDF, 101k)

Optimization of Cold Water Starch Granulations Using High Shear Granulating Methods and Capitalizing on the Strength of Fully Pregelantinized Starch Incorporated as a Dry Binder

(PDF, 2.5 Meg)

AAPS - 2005

Application of Thermal Effusivity as a Non-Destructive Method to Evaluate the Impact of Compression Forces

(PDF, 341k)

Impact of Different Roll Sizes on Roller Compactor Granulations

(PDF, 483k)

AAPS - 2004

Top-Drive vs. Bottom-Drive High-Shear Granulation: Dissolution Profiles of Immediate Release Tablets

(PDF, 584k)

Comparison of Flow Properties of Granules Prepared by Top-Drive and Bottom-Drive High-Shear Granulators

(PDF, 392k)

Comparison of Film Coating Process Using Fully Perforated and Partially Perforated Coating Pans

(PDF, 318k)

Comparison of Methods for Determining Particle Size Distribution and Powder Flowability

(PDF, 779k)

AAPS - 2003

Top-Drive vs. Bottom-Drive High-Shear Granulation: Effect on Granule Properties of an Immediate Release Formulation

(PDF, 568k)

AAPS - 2002

Comparison of Wet Granulation Processes Using Top-Drive and Bottom-Drive High-Shear Granulators

(PDF, 590k)

Direct Comparison of Wet-Granulation Processes in a High-Shear Granulator and an Innovative Rotor Processor

(PDF, 576k)

AAPS - 2001

The Change in Particle Size of Immediate Release and Controlled Release Formulations During High-Shear Wet-Granulation Processes

(PDF, 507k)

Congress of Americas - 2001

Comparison of End-Point Determination by Wet-Mass Time, Product Temerature Change, and Power Consumption for Scale-Up of High Shear Granulation of Immediate and Controlled Release Formulations

(PDF, 485k)

AAPS - 2000

The Effect of Load Volume on Particle Size and Temperature Rise of Wet-Granulations in a High-Shear Granulator

(PDF, 675k)

The Effect of Consecutive Batch Processing on Particle Size and Thermal Behavior in a High-Shear Granulator

(PDF, 623k)

The Effect of Consecutive Batch Processing on Particle Size and Thermal Behavior in a High-Shear Granulator - Addendum

(PDF, 1.8 Meg)